Batman Arkham Origins Shin Guards

1 (Large) (Medium) (Small)

To make my Origins shins I designed a template and assembled it first with paper to check the size and look.

IMG_2775 (Medium) (Small)
IMG_2773 (Medium) (Small)

Then all the shapes were cut out of 3mm and 5mm foam. To get them to retain a curved shape, I held them in a bent position while gluing the layers together. Velcro was then added along with some connector pieces and an elastic strap for the back of the knee.

IMG_2849 (Small)
IMG_2852 (Small)
IMG_2823 (Small)

IMG_2856 (Small)

The template is available here.

Tagged . Bookmark the permalink.

Comments are closed.